Take a look at your shopping cart casters

Are your shopping carts ready?

The fall shopping season is upon us. 

To make sure that you order the correct replacement wheels for your shopping cart, here is a helpful chart to show you the different measurements:

1 Overall Height - The vertical distance between the floor and the mounting plane of the equipment. 

2 Offset - The horizontal distance between vertical center lines through the kingpin and the wheel center. (Not shown in diagram) 

3 Swivel Radius - The horizontal distance from the vertical centerline of the kingpin to the outside edge of the wheel tread. This dimension specifies the minimum distance required for the caster to swivel 360° when mounted. 

4 Wheel Diameter 

5 Tread Width

You can find more information on wheel materials for different surfaces here.

For your convenience, we listed the most commonly used casters for shopping carts:

 

CA 327-A

(5" X 1-1/14" Poly Wheel Assembly used for front & back)

CA 615

(Front swivel caster assembly with 1/2" x 3/4" stem)

 

 

CA A327

(5/16" Diameter Axle Bolt & Nut)

CA RK-1

Shopping Cart Repair Kit* includes:
(10) 5" Front Swivel Casters
(20) 5" Poly-U Wheels
(20) Axles & Locknuts
*All components fit any shopping cart
*Also includes free drill bit for removal of old, worn-out wheels

Order replacement parts at
www.GenericParts.com

Contact us at support@genericparts.com or call (800) 331-0839

High Temperature Caster Wheels and Swivel Caster Assemblies

Are you looking for caster wheels for your bakery carts or autoclaves? We have you covered! 

CA CAS-507    Caster wheel

CA CAS-507-S   Swivel caster wheel assembly

Both swivel & rigid caster models are available for a variety of applications on your material handling equipment.

• High-temperature impact resistant epoxy resin
• Non-rusting stainless steel heat resistant yoke
• Precision bearings, available in 5/16" zinc or stainless steel
• Maintenance-free, extended bearing life
• Non-marking wheels for floor protection

Visit our website today!

Follow our blog.

Watch our How-to videos

Log in with your customer number to view net pricing.

 

Or call our highly knowledgeable customer service staff

(800) 331-0839

or email us at csinfo@genericparts.com 

Generic Parts Service is the world's largest supplier of after-market pallet jack parts.

We go the extra mile to make sure you get what you need - fast.

Check out

over 200,000 new replacement parts for

 Electric Lift Trucks  

Manual Pallet Jacks 

LPG Powered Forklifts

Industrial Seal Kits 

and more

Order today at

www.GenericParts.com

Class III electric lift trucks need stability casters?

Class III Electric lift trucks are electric pallet jacks you'll usually encounter as both walk-behind (walkie) and rider models. Counterbalanced walk behind stackers and units featuring straddle legs also fall into this category.

These will have vertical or horizontal movement and lift loads ranging from 2,000 - 8,000 lbs. The operator position is always in the front of the truck and controls the equipment through a steering tiller. All controls are mounted on the top of the tiller and the tiller is moved side to side to steer the truck. 

Most equipment in this category lifts loads only a few inches off the ground however the stackers lift to heights commonly found on forklifts. This class of equipment is typically used to unload delivery trucks and are best for short distances to a staging area or in small warehouses.

So why the need for stability casters?  

A stabilizer caster evens out the load balance by providing another point of contact with the ground in addition to the Drive Tire at the driver position and the load bearing wheels under the forks. They also feature shock performance to stabilize the load as it corners. Acting as a shock also reduces wear on the electrical components. Onboard chargers, tiller cards, and motor controllers are just a few examples of components you'll replace less often when utilizing a high-quality stabilizer caster.  

All stabilizer casters are not created equal. When replacing an OEM caster or converting stabilizer bar to a caster, you'll get the most bang for your buck when you trust Generic Parts Service with your order.

The stabilizer casters we feature are engineered as a drop-in replacement for Crown, Hyster, Yale, and Raymond electric lift trucks.

• Less height and performance deterioration over time than traditional metal springs for reliable and consistent performance. Advanced technology includes a premium polyurethane block to replace the use of unreliable metal springs while also providing greater stability in cornering.  
• Premium polyurethane block technology creates greater stability by reducing oscillation and rocking effect the equipment experiences. 
• Important heavy-duty construction with 0.25" thick steel plates and with minimum welds to reduce weak spots. 
• Convenient Height Adjustments offer an easy three-position adjustment bolt to eliminate the hassle of additional spacers
• Uses a larger wheel (4" O.D.) with the toughest polyurethane compound available and high quality sealed bearings for a longer wheel life 
• Rust-Proof Zinc plated parts and a greasable wheel or axle for corrosive environments 
• Less downtime means higher productivity!

I have a skid plate, can I upgrade to the caster?

From the factory, some walkie pallet jacks feature a skid plate and not the caster assembly. This design has its limits and will never provide the benefits of reduced electrical repairs or true load stability. Our stabilizer casters feature the same bolt pattern and are an easy solution to upgrade your equipment.

The Yale MPB 040 E is an example of one model you can replace the skid plate with our premium stabilizer caster.

Replace stabilizer bar part number YL 524149414 with stabilizer caster part number YL 580023164


        

Check out our website for stabilizer caster part numbers and current pricing we offer by following this link. 
Ready to learn more or place an order? Call our highly knowledgeable customer service team at (800)331-0839 or email csinfo@genericparts.com.    




Do you have manual pallet jacks in your fleet? We have a YouTube channel featuring "How-To" videos. Here are some of our customer's favorites!

How-to videos:

• Replace the load wheels on your pallet jack
• Replace the steer wheels on your pallet jack
• How-to Install the handle on your new pallet jack
• How-to remove a corroded load wheel axle

Order and Save ...
...Time with Same-Day Shipping
...Money with Free Shipping on Orders over $450*

Order today at www.GenericParts.com

*Commercial ground shipping within Continental US Only.  Some items excluded

CAT NPP 60 Electric Pallet Jack Parts Support

For your CAT NPP 40 electric lift truck we have replacement load and caster wheel assemblies available. Wheel assemblies are complete with bearings.

Did you know...

Interrupting a charge cycle on your forklift battery cause damage and waste one of your charge cycles.

Part # CT 1029602-A

Load wheel assembly

Part # CT 1009309

Caster wheel assembly

What other parts do you regularly stock for your electric lift trucks?

Mitsubishi PMWR30 Walkie Rider Lift Truck

See what we have for your Mitsubishi PMWR30 electric pallet truck. We make load wheel and caster wheel assemblies that include bearings.

Did you know...

The first electric forklift had a rechargeable battery with the capacity to last as long as one working shift, approximately 8 hours.


Part # CT 1029607-A

Load wheel assembly

Part # CT 1009309   

Caster wheel assembly

How often do you exchange caster wheels on your electric lift truck?

Toyota HBE 30/40 Electric Pallet Truck

Looking to replace load wheels on your Toyota HBE 30/40 electric pallet truck? We stock replacement load wheel assemblies, caster assemblies and more !

Did you know...

The development of standardized wood pallets in 1930 (and later, World War ll) actually helped increase the production of forklifts.

Part # TO 00590-00025-71-A

Load wheel assembly

Part # TO 00590-42306-71-A C

Caster wheel assembly

Which parts do you replace regularly?

Crown PE4000 Series Walkie Rider

For your Crown PE4000 electric pallet truck we have replacement wheel kits available. Battery connectors, control arms and axles are also in stock. 

Same day shipping is available to keep your equipment moving !

Part # GWK-PE4000-LW

Load wheel kit

Part # CR 083179-035

Caster wheel assembly, 95 A

How often do you typically change out load wheels on your Crown PE4000?