Some Basics about Forklifts

Used or new forklift? Training? OSHA?

When do my forks NOT meet OSHA standards?

When 10% of the fork heel is worn – results in 20% loss of capacity. And while checking the wear,  always check for cracks and deflection too!

When do I buy a used forklift vs. a new one?

Rough guideline: If you use a forklift 3-4 hours a day, you may be better-served with a used one. More than 4 hours a day, buying a new forklift would be most beneficial. 
Keep in mind, environment, hours used, emission restrictions, and general application may require the purchase of a new forklift.

What kind of training is required to operate a forklift?

You’ll need a valid state driver’s license and on the job operator training. In addition, OSHA requires that each forklift operator completes forklift safety training. OSHA may even conduct surprise inspections and penalties for non-compliance can go up to $7,000. 

Visit www.osha.gov for more information on training compliance.

Where do I get quality replacement parts?

That one is easy. On our website 24/7 

We have replacement parts - like Mast Chains, Seats, Lights, Horns, Backup Alarms, Starters, Alternators, and more  - for all major brands. 

Call us if you don't find what you need!

THE HOLIDAYS ARE COMING

Get your jacks ready for the busy season with this checklist

Here are five important items for your checklist to make sure your warehouse is prepared.

1. Check your warehouse floors and outdoor loading areas to make sure the workplace is clean and clear of any obstacles. Make sure that debris and spills are cleaned and swept up so that your operating environment is safe for your equipment to operate in. Debris and spills can ruin or shorten the life of your wheels or get in the way of your loads. 

2. Inspect the wheels on your pallet jacks and forklifts regularly to make sure that they are rolling easily and that there are no flat spots or delamination. Over time, the poly or rubber on your wheels can crack or wear unevenly resulting in unstable and unsafe loads. This can cause additional stress on your machine and on your workers' hands and arms due to vibration and rolling instability. We offer convenient wheel kits for manual pallet jacks and electric lift trucks. 

3. Have you looked at the forks lately?  Make sure there are no cracks or damage as the forks bear the brunt of the load. Using a damaged jack can cause a load to shift and fall and may damage products or cause injuries to your workers.

4. Check the hydraulic pump for leaks and make sure that it is operating properly. Does it pump up and hold your load? Does it lower safely? 

5. Test the handles, levers, controls, and horn where applicable, so that you are confident everything is working properly before you add a heavy load. 

Check our website for replacement parts you need, and contact us for any technical support.

Here is a list of instructional videos of the most common pallet jack repairs:

How to bleed the hydraulic unit

How to remove corroded or rusty load wheel axles

How to replace load wheels

How to replace steer wheels

and more  How To Instructional Videos

Everything you need to know about Lift Truck Tires

Everything you need to know about Lift Truck Tires

Free tire pressing service available with the purchase of a new tire or tire and wheel combo. Tire and hub assemblies are available in stock for many of the most popular electric pallet trucks. If you don't see what you are looking for here, just call us at 800-331-0839 or email us at csinfo@genericparts.com.

Crown WP Series & PE Series  *  Big Joe WPT45  *  BT Prime SMX45  *  Hyster W40XT & W40Z  *  Jung Heinrich EJE120 * Mitsubishi PW23 & PW30 * Raymond 102XM * Toyota 7HBW23  *  Yale MPB040E & MPB045E

Poly tires are recommended for electric trucks, especially when ridden  or capable of lifting above 4 feet, due to the superior stability vs. rubber tires. Polyurethane also has less rolling resistance than rubber which increases efficiency.

Polyurethane tires are harder, can carry greater loads and will outlast a rubber tire by as much as 4 times.  However, they also have less cushioning ability.  Polyurethane tires offer improved traction with different tread types without sacrificing load capacity.  They are more durable and are less likely to suffer from chunking, tearing or delaminating.  Polyurethane tires are able to roll over debris and rough floors with less likelihood of cutting or tearing.

Polyurethane can be slippery when wet but tread styles, such as the Diamond Groove or XGroove are available for wet and cold floor conditions while maintaining high load capacities.

Rubber tires can offer a softer ride and are generally used outdoors on the larger propane and internal combustion lift trucks.  Rubber tires dissipate heat well and are recommended for use at higher speeds. They offer a broader footprint providing better traction, particularly in wet conditions, but have lower load capacities.  Rubber tires are typically made with carbon black and because of this will mark indoor floors.

Tread Patterns

Smooth – Smooth surface tires are best on clean floors and standard warehouse environments.  There are several types of smooth tires.  SC = smooth crown. SF = smooth flat.  These can also have tapered sidewalls TSW or straight sidewalls SSW

X-Groove, also known as Diamond Groove (XG) – These have an X or Diamond pattern cut in the tire surface, best for wet floors and freezer areas.  

Check out this video on When to Replace and How to Measure Your Drive Tire

Check out these other awesome HOW TO VIDEOS

We have the Press-On Tires you need!

Industrial Seal Kits for Heavy Machinery

If you're on the hunt for hydraulic/pneumatic cylinder seal kits for your heavy material handling equipment...

Look no further!

Industrial seal kits are available for the following kinds of equipment:

• Construction
• Mining
• Aerial lift
• Crane
• Logging
• Dump/refuse trucks
• Agriculture
• Paving
• Material handling
• Industrial plant applications

Email or call (800)331-0839 for more information. Place your order today!

Prevent Costly Weather Damage To Your Material Handling Equipment

• Check unit for maintenance issues that may be lingering from warm summer temperatures.
• Oil needs to be changed every 150-200 run time hours & grease those fittings !
• Winterize your cooling system, adjust the water to coolant ratio in order to prevent broken radiators or worse, potential cracked blocks and heads.
• Use optimum levels for oil, lubricants, & coolants.
• Make daily inspections of your machinery

View our expansive inventory of replacement parts specifically for both internal combustion and electric forklifts. 

Crown WP3000 Series Connector Kit

Need parts support for Crown WP3000? We have connector kits, switch assemblies and of course wheels, wheel kits, axles, and more! Check with us for other parts we make for Crown electric lift truck equipment.

Same day shipping available to keep your equipment running!

Part # CR 130197-004

4 Pin Connector Kit

Part # GWK-WP3000-LW

Load Wheel Kit

What other parts for Crown WP3000 are you looking for?