DuraGuard Toe Guard

Reduce the Risk of Foot Injury

·     Protects against foot injury by reducing the risk of pallet jack rolling over operators foot

·     Self-adjusting shroud adjusts to uneven floors and various pitches of dock plates and ramps

·     Allows full range of steering motion

·     One bolt installation on many pallet jack models

·     Pallet Jacks available equipped with our DuraGuard.

·    Available with Steer Wheels installed

·     Available for these models. Call us if you don’t yet see your model listed.

Order Replacement Parts for Pallet Jacks, Electric Lift Trucks & Forklifts at www.GenericParts.com Log in with your customer number to view net pricing. Or call our highly knowledgeable customer service staff (800) 331-0839 Follow our blog Generic Parts Service is the world's largest supplier of after-market pallet jack parts. We go the extra mile to make sure you get what you need - fast.

Check out over

200,000 new replacement parts for 

 Electric Lift Trucks 

Manual Pallet Jacks 

LPG Powered Forklifts

Industrial Seal Kits 

and more 

Save...

... Time with Same-Day Shipping

... Money w/ Free Shipping on Orders over $450*

*Commercial Ground shipping within Continental US only. Some items excluded.

New Wheel Kits for Electric Lift Trucks

NEW WHEEL KITS FOR ELECTRIC LIFT TRUCKS

Do you need wheels for your Electric Lift Truck?

Why buy a wheel kit?   Wheel kits are economical and convenient, saving you time and money. Every wheel kit includes all the hardware you need for easy to install wheel replacement. Most orders are shipped the same day and come in a compact, easy to store box.

Most wheel kits come with Durarun 95A Poly Wheel assemblies with bearings which are ideal for display floors, carpeting, and warehouses. They mark floors the least and roll easily and quietly.

XL Wheel kits come with XL 97A Poly Wheel assemblies with bearings: Longer lasting and harder, they roll more easily than 95A Poly. XL 97A Poly wheels are also engineered specifically to reduce the likelihood of delamination. If delamination is an issue, we recommend XL 97A poly load wheels.   

Each load wheel kit comes with two load wheel assemblies including bearings along with axles and fasteners.

We have load wheel kits for most electric lift trucks. 

Here are some of the newest additions to the line-up.  If you do not see what you are looking for here, check out our selection of Wheel Kits for Electric Lift Trucks.

 Or give us a call at 1-888-999-7715. 

Hyster B60ZHD

GWK-B60ZHD-LW   Load Wheel Kit, Durarun Poly 95A    

GWK-B60ZHD-LW-XL  Load Wheel Kit, XL Poly 97A     

Hyster B80ZHD

GWK-B80ZHD-LW   Load Wheel Kit, Durarun Poly 95A  

GWK-B80ZHD-LW-XL  Load Wheel Kit, XL Poly 97A 

Multiton ELE35     

GWK-ELE35-LW   Load Wheel Kit, Durarun Poly 95A     

Multiton ELE45     

GWK-ELE45-LW   Load Wheel Kit, Durarun Poly 95A   

Raymond 8310

GWK-8310-LW   Load Wheel Kit, Durarun Poly 95A 

GWK-8310-LW-XL Load Wheel Kit, XL Poly 97A  

Raymond 8410

GWK-8410-LW   Load Wheel Kit, Durarun Poly 95A  

GWK-8410-LW-XL Load Wheel Kit, XL Poly 97A 

Raymond 8510

GWK-8510-LW   Load Wheel Kit, Durarun Poly 95A   

GWK-8510-LW-XL Load Wheel Kit, XL Poly 97A  

Yale MPE060VG

GWK-MPE060VG-LW   Load Wheel Kit, Durarun Poly 95A  

GWK-MPE060VG-LW-XL  Load Wheel Kit, XL Poly 97A    

Yale MPE080VG

GWK-MPE080VG-LW   Load Wheel Kit, Durarun Poly 95A   

GWK-MPE080VG-LW-XL  Load Wheel Kit, XL Poly 97A    

Unicarriers 2W7

GWK-2W7-LW    Load Wheel Kit, Durarun Poly 95A     

GWK-2W7-LW-XL    Load Wheel Kit, XL Poly 97A     

Unicarriers WLX

GWK-WLX-LW    Load Wheel Kit, Durarun Poly 95A   

GWK-WLX-LW-XL     Load Wheel Kit, XL Poly 97A     

 When was the last time you inspected your wheels? 

Blue Giant PT-50 and PT-55 Pallet Jack Parts Support

For your Blue Giant PT-50 manual pallet jack we have load and steer wheel assemblies. Wheel assemblies include bearings. Different wheel materials are available for your application.

Did you know...

To ensure maximum life from your pallet jack, always replace the parts that are broken or worn, after all parts are generally inexpensive and easy to replace!

Part # BG 103-297-A-D

Load wheel assembly

Part # BG 810-456

Hydraulic unit seal kit

What type of wheel material works best in your environment?

Traverse Inspection Lift-Rite L-50 and L-50 CHEP (4 way)

If you own or use a Lift-Rite L-50 manual pallet jack, we recommend a traverse inspection before each use. Often, wear can occur on the bearing shoulder (the point where the shoulder bolt attaches to the lifting link) and cause egg-shaped or oblong damage to the traverse requiring replacement.

Removal
Turn the jack onto its side and remove the steer wheel assembly (see Steer Wheels and Axle). Remove the snap ring under the traverse and turn the jack upright. Be careful lowering the stem of the hydraulic unit onto the ground. Pump the jack up to gain access to and remove the bolt that fastens the lift ram to the frame. Pull the hydraulic unit away from the frame and out of the traverse. Remove the shoulder bolts and the traverse.(15-25 mins.)

Installation
Attach the traverse to the lifting link with its shoulder bolts. Slide the hydraulic unit into the traverse, with the washers and lower thrust bearing already in position on the stem of the hydraulic unit. Position the lift ram and ball under the A-Frame. Tighten the bolt onto the ram to hold the ram in place. Turn the jack onto its side, and install the snap ring onto the stem of the hydraulic unit to hold the traverse in place. Install the steer wheel assembly (see Steer Wheels and Axle). (15-25 mins.)

For more information email or call us today (800)331-0839.

Steer Wheels and Axle Inspection Lift-Rite L-50

For your Big/Joe Lift-Rite L-50 manual pallet jack we recommend inspecting the steer wheel and axle before each use. Steer wheels should be free of flat spots and large pieces of embedded material.

Indicators for when steer wheel replacement is necessary:

• Chips in the wheel
• Not turning freely
• Rubs traverse
• Worn more than 1/4"

Note:

If the steer wheel rubs the bottom of the traverse, check for the correct installation of the snap ring underneath the traverse. Replace if it is worn more than 1/4" from the normal outside diameter.

Removal

Steer wheels - Turn the jack on its side and remove the hubcap. Remove the snap ring for the newer style or the roll pin for the older style that fastens the steer wheels to the axle. 

(10 mins.)

Steer wheel axle - Turn the jack on its side and remove the steer wheel. Drive out the roll pin that fastens the axle to the stem of the hydraulic unit and slide the axle out. (15 mins.)

Installation

Steer wheel axle - Slide the axle into the stem of the hydraulic unit and fasten with roll pin. Install the steer wheels. (10 mins.)

Steer wheels - Slide the wheels onto the axle and secure with fasteners (snap rings for the newer style or roll pins for the older style). (10 mins.)

Line drawings available for this unit. Email or call us for your parts (800)331-0839.

How To: Turn Manual Pallet Jack Upright

Have you ever wondered if there's a better way to turn over your manual pallet jack? 

There is a proper way to turn your pallet jack back upright once you've replaced wheels and/or other worn items located on the undercarriage... and we can show you !

Be sure to check out Generic Parts Service YouTube channel for more 'How To' Videos:

Remove load wheels

Install load wheels

Replace the load wheels on a pallet jack

Replace the steer wheels on a manual pallet jack

Pallet Mule AA5500 Manual Pallet Jack

For your Pallet Mule AA5500 manual pallet jack we offer both load wheel and complete wheel kits. Complete wheel kits include a steer wheel with two load wheels assembled with bearings, plus all the necessary hardware for wheel replacement.

Did you know...

A simple change of wheels will extend the life of your pallet jack, and reduce industrial waste. That's thinking green.


Part # GWK-PUAA-CK

Complete wheel kit

Part # PU AA-68-Complete

Handle assembly

Don't see what you need? View all other available parts for Pallet Mule AA5500.

Multiton M Manual Pallet Jack

For your Multiton M manual pallet jack we have replacement load wheels pre-assembled bearings pressed in.

Did you know...

Model 'M' hydraulic units are attached to the frame with a roll pin. Entry rollers are also held on by roll pin. In addition, you'll know your jack is model M if it has a hand release and vertical pump piston.

Part # MU 325-P

Load wheel assembly

Part # MU 90164-ST

Steer wheel assembly

Don't see what you need? View all our available parts for Multiton.

Magnum (Intrupa) 5000 Manual Pallet Jack

For your Magnum 5000 (Intrupa) manual pallet jack we stock replacement load and steer wheel assemblies, hydraulic pump seal kits and hard parts.

We also offer free technical advice and same day shipping for orders received by 6pm EST.

Part # MG 536-A
Load wheel assembly

Part # MG 153
Hydraulic pump seal kit

Don't see what you need? View all our available parts for Magnum.

Lift-Rite LCR55 Manual Pallet Jack

For your Lift-Rite LCR55 unit we have replacement load wheel and complete wheel kits available. Each kit includes all the hardware you need for wheel replacement. 

Poly is the most common wheel and tread material is typically the best option for display floors, carpeting, and warehouses. They do not mark the floors and roll easily and quietly.

Part # GWK-LCR-LW

Load wheel kit

Part # GWK-LCR-CK

Complete wheel kit

Don't see what you need? View all available parts for Lift-Rite equipment.

Jet PTX Manual Pallet Jack Parts Support

Looking for replacement parts for your Jet PTX manual pallet jack? We stock load & steer wheel assemblies, handle assemblies, hard parts and more.

Same day shipping available to keep your equipment moving.

Part # JT PTX2748-104

Hydraulic Pump Seal Kit

Part # JT PTX2748-054-ST

Steer Wheel Assembly

Don't see what you need? What other parts for Jet PTX are you looking for?