Showing posts with label wheel replacement. Show all posts
Showing posts with label wheel replacement. Show all posts

Tuesday, January 6, 2026

Why inspect my pallet jack regularly?

Why indeed?

  • To avoid injury

  • To avoid downtime
  • To avoid damage to your pallet jack
  • To avoid damage to your inventory
  • To avoid damage to your floors


We recommend performing this inspection every 6 months:


1. 
Test raise & lower function. If unit will not lift, bleed hydraulic unit by pumping handle 10 times with control lever in release position.

2.

Once you have verified that the pallet jack will raise and lower, inspect both steer wheels and load wheels. Replace wheels if any points below apply:


● Wheel diameter is worn 0.25" from new.
Use calipers to measure.
Examples:
3" diameter load wheel worn to 2.75".
7" diameter steer wheel worn to 6.75".

● Excessive debris embedded in wheel tread or chunks of the polyurethane tread material are missing.

● String or other material wound around the axle prevents the wheel from turning freely.

● Visible cracking of the steer wheel hub around the bearing.

Here you find a How-to video on replacing the steer wheels.


3.
Inspect the load rollers. If they do not turn freely or are visibly damaged, replace.



Here you find a How-to video on how to replace load wheels.

Note:

Always replace both load wheels or steer wheels even if only one wheel meets the criteria for replacement.

Go to our website to find the wheels you need, and more.




Tuesday, November 12, 2024

Step-by-step: How to replace steer wheels

How to replace the steer wheels on your pallet jack

Tools needed:

Flathead screwdriver
Snap ring pliers

Process

First, you need to turn the jack upside down.

Here is a video showing you the correct way to turn your jack over.

Once your jack is turned, remove the hubcaps on each wheel.


Next, use a small six-inch pair of snap ring pliers to remove the snap ring., then slide off the washer.


At this point, the handle will need to be pivoted from one side to the other, allowing for the wheel to slide off the axle.
Now we'll install the new wheels in reverse order: Place the wheel on the axle, add the washer, and secure with the snap-ring. Finish placing the hubcap. Same on the other side of the axle with the second wheel.

Now we turn the jack back upright. You want to lower the jack with the handle in the release position. Pump the handle five or six times which will bleed out any air that may have floated into the valve area.

Find new steer wheels for your pallet jack on our website.

We recommend always having an extra set of wheels to avoid downtime.

We also offer convenient Complete Wheel Kits that contain a set of steer wheels, a set of loads wheels and all the hardware needed to replace them.

For questions or to place orders: 800-331-0839 or email csinfo@genericparts.com



Wednesday, December 30, 2015

Crown GPW Electric Pallet Truck Parts Support

Look what we have for your Crown GPW electric pallet truck, drive tires, switches, contactor tip kits, caster assemblies and more.

Did you know...

Battery operated forklifts typically last about 50-100 % longer than internal combustion forklifts.

Part # CR 71894

Caster wheel assembly



















Part # CR 042028

Rubber drive tire, smooth flat tread

















Don't see what you need? View all our other available parts for Crown GPW.













Thursday, October 22, 2015

Raymond 102XM Walkie Pallet Truck Parts Support

Look what we have available for your Raymond 102XM walkie electric pallet truck. Prepackaged load wheel kits contain all necessary parts for wheel replacement.

Did you know...

Preventing a problem is always better than fixing one. Here is a daily check list for finding potential hazards with your material handling equipment.

Part # GWK-102XM-LW

Load wheel kit















Part # RA 939-353-251

Caster wheel assembly
















Don't see what you need? View all available parts for Raymond 102XM.

Monday, August 31, 2015

How To: Turn Manual Pallet Jack Upright

Have you ever wondered if there's a better way to turn over your manual pallet jack? 

There is a proper way to turn your pallet jack back upright once you've replaced wheels and/or other worn items located on the undercarriage... and we can show you !

Be sure to check out Generic Parts Service YouTube channel for more 'How To' Videos:





Remove load wheels

Install load wheels

Replace the load wheels on a pallet jack

Replace the steer wheels on a manual pallet jack