Common Replacement Parts for Electric Lift Trucks and Forklilfts

Common Replacement Parts

for Electric Lift Trucks and Forklifts

Tip: Less machine downtime = more productivity, and a better ROI over your equipment's life cycle.

• Have you got a leak? Most common leak points are hoses. Check hoses for cracked rubber and exposed wire structure. Make sure the contact points are properly sealed.  Generic Parts Service carries a huge inventory of hoses, industrial seal kits, and lift truck seal kits. We have kits for the leading manufacturers of pallet jacks, material handling equipment, dump trucks, farming equipment, and logging equipment.

• Are you having travel or lift issues? Check for leaks, cracks, and wear. We have seal kits, mast parts and everything you need to get moving.

• Is your unit was running rough? We carry replacement alternators, vaporizers, radiators, engines, and engine parts.

• Are you having electrical issues, including problems with buttons, switches, pedals or other electrical parts? Make sure wires are not broken or chafe against each other. Switches can mechanically break or corrode. We have a large selection of buttons, boards, switches, wiring harnesses, and pedals as well as many other commonly replaced items.

• How are the brains of the operation? We have replacement control pods, control handles and controllers to help get you moving in the right direction again.

• Are your important safety features, like horns, alarms, and lights in good working order? Some of these wear over time, but most suffer damage. Check your warehouse for obstructions and damage points. Install the accessories inside the overhead guard or within the body of the machine. If broken: We have all of these accessories and more to keep your equipment up to safety standards.

• Are your seatbelts and seats in good working order?  In most cases, the entire seat assembly (seat belt, seat) needs to be replaced to fix the reported issue.  We have aftermarket replacement seats and seat belts for a wide variety of machines.

• How is the condition of your frame and undercarriage? Making sure your frame and undercarriage are in good working order maximizes worker and product safety as well as the working life of your equipment. We have bushings, tension bars, link assemblies, riser assemblies and more to keep you operating safely.

• Have you replaced your batteries but they are still having trouble charging up? Battery life should be roughly 5 years but many factors can influence that. Make sure your battery has enough water and check regularly. We have replacement battery chargers and battery connectors for most brands..

• Have you inspected your wheels lately? Chunked or worn tires or load wheels? We carry wheel kits for most brands of forklifts. Kits include two load wheel assemblies with bearings pressed, along with axles and fasteners.  We also have the drive tires and caster assemblies you need.

Wheel Kits for Manual Pallet Jacks 

Wheel Kits for Electric Lift Trucks

Wheel Kits for High Lift / Scissor Lifts

Need parts? Find them on our website www.genericparts.com

Or call our highly knowledgeable customer service staff (800) 331-0839

Generic Parts Service is the world's largest supplier of after-market pallet jack parts.

We go the extra mile to make sure you get what you need - fast.

COVID-19: SAFETY AT WORK

GENERIC PARTS SERVICE wants to let you know that the health and safety of our community, our customers and our employees are of the utmost importance to us and we have enacted additional measures to ensure we meet the needs of our customers as well as provide for the health and safety of our employees while still working to provide essential services to keep the country and our supply chain rolling during this worldwide emergency.

For those of us who are reporting to our workplaces, here are some reminders:

• Stop handshaking – use other non-contact methods of greeting

• Clean hands at the door and schedule regular hand washing reminders by email

• Don't forget to wipe down your machinery anywhere you touch it

• Social distancing - keep 3 to 6 feet away from each other

• Create habits and reminders to avoid touching our faces and cover coughs and sneezes

• Although gloves are protective, they are just like hands in that they harbor germs and viruses so they do need to be disinfected and don't touch your face with your gloves.

• Disinfect surfaces like doorknobs, tables, desks, and handrails regularly

• Increase ventilation by opening windows or adjusting air-conditioning

• Be careful with meetings and travel, use video conferencing for meetings when possible

• When not possible, hold meetings in open, well-ventilated spaces

• Consider adjusting or postponing large meetings or gatherings

• Assess the risks of business travel

• Handle food carefully

• Limit food sharing

• Practice strict hygiene and stay home if you are feeling sick or have a sick family member in their home

And to help you keep on rolling, GENERIC PARTS offers

· Quality replacement parts for Electric Lift Trucks and Manual Pallet Jacks

· Pre-packaged Wheel Kits for Manual Pallet Jacks, Electric Lift Trucks & Scissor High Lifts

And helpful How-to-Videos:

• How-to replace the load wheels

• How-to replace steer wheels  

• How-to measure the wear on your forklift drive tires

For free technical assistance:

Call our helpline 800-331-0839 or email csinfo@genericparts.com       

Battery chargers and connectors for your electric Lift Trucks

Check your batteries, battery chargers, and connectors.

When using battery chargers, always check the AC and DC Cables, plugs, contact tips, and connectors for damage, exposed copper, and signs of excessive heat.

And to ensure the proper function of your batteries:

• Check the cell water levels and add water as needed. 
• Wipe down the top of the battery with a neutralizer as needed.
• Inspect the batteries, including the cables, connectors, contact tips, cell tops, inter-cell connectors, and watering systems for signs of physical damage, excessive heat or corrosion.   

Our vast inventory includes

 

and



Browse our selection of electric lift truck Battery Chargers and Battery Connectors by Crown, Hyster, Raymond, Toyota, Yale, and others.

Need help finding the right battery charger for your model?

Email csinfo@genericparts.com

or

call us at 1-888-999-7715

We've got over 200,000 new replacement parts for

Electric Lift Trucks 

Manual Pallet Jacks 

Wheel Kits for Electric Lift Trucks

Wheel Kits for Manual Pallet Jacks

And more!

Class III electric lift trucks need stability casters?

Class III Electric lift trucks are electric pallet jacks you'll usually encounter as both walk-behind (walkie) and rider models. Counterbalanced walk behind stackers and units featuring straddle legs also fall into this category.

These will have vertical or horizontal movement and lift loads ranging from 2,000 - 8,000 lbs. The operator position is always in the front of the truck and controls the equipment through a steering tiller. All controls are mounted on the top of the tiller and the tiller is moved side to side to steer the truck. 

Most equipment in this category lifts loads only a few inches off the ground however the stackers lift to heights commonly found on forklifts. This class of equipment is typically used to unload delivery trucks and are best for short distances to a staging area or in small warehouses.

So why the need for stability casters?  

A stabilizer caster evens out the load balance by providing another point of contact with the ground in addition to the Drive Tire at the driver position and the load bearing wheels under the forks. They also feature shock performance to stabilize the load as it corners. Acting as a shock also reduces wear on the electrical components. Onboard chargers, tiller cards, and motor controllers are just a few examples of components you'll replace less often when utilizing a high-quality stabilizer caster.  

All stabilizer casters are not created equal. When replacing an OEM caster or converting stabilizer bar to a caster, you'll get the most bang for your buck when you trust Generic Parts Service with your order.

The stabilizer casters we feature are engineered as a drop-in replacement for Crown, Hyster, Yale, and Raymond electric lift trucks.

• Less height and performance deterioration over time than traditional metal springs for reliable and consistent performance. Advanced technology includes a premium polyurethane block to replace the use of unreliable metal springs while also providing greater stability in cornering.  
• Premium polyurethane block technology creates greater stability by reducing oscillation and rocking effect the equipment experiences. 
• Important heavy-duty construction with 0.25" thick steel plates and with minimum welds to reduce weak spots. 
• Convenient Height Adjustments offer an easy three-position adjustment bolt to eliminate the hassle of additional spacers
• Uses a larger wheel (4" O.D.) with the toughest polyurethane compound available and high quality sealed bearings for a longer wheel life 
• Rust-Proof Zinc plated parts and a greasable wheel or axle for corrosive environments 
• Less downtime means higher productivity!

I have a skid plate, can I upgrade to the caster?

From the factory, some walkie pallet jacks feature a skid plate and not the caster assembly. This design has its limits and will never provide the benefits of reduced electrical repairs or true load stability. Our stabilizer casters feature the same bolt pattern and are an easy solution to upgrade your equipment.

The Yale MPB 040 E is an example of one model you can replace the skid plate with our premium stabilizer caster.

Replace stabilizer bar part number YL 524149414 with stabilizer caster part number YL 580023164


        

Check out our website for stabilizer caster part numbers and current pricing we offer by following this link. 
Ready to learn more or place an order? Call our highly knowledgeable customer service team at (800)331-0839 or email csinfo@genericparts.com.    




Do you have manual pallet jacks in your fleet? We have a YouTube channel featuring "How-To" videos. Here are some of our customer's favorites!

How-to videos:

• Replace the load wheels on your pallet jack
• Replace the steer wheels on your pallet jack
• How-to Install the handle on your new pallet jack
• How-to remove a corroded load wheel axle

Order and Save ...
...Time with Same-Day Shipping
...Money with Free Shipping on Orders over $450*

Order today at www.GenericParts.com

*Commercial ground shipping within Continental US Only.  Some items excluded

CAT NPP 60 Electric Pallet Jack Parts Support

For your CAT NPP 40 electric lift truck we have replacement load and caster wheel assemblies available. Wheel assemblies are complete with bearings.

Did you know...

Interrupting a charge cycle on your forklift battery cause damage and waste one of your charge cycles.

Part # CT 1029602-A

Load wheel assembly

Part # CT 1009309

Caster wheel assembly

What other parts do you regularly stock for your electric lift trucks?

Raymond 111,112,113,114 Series Electric Walkie Pallet Trucks

For your Raymond 111, 112, 113, 114 series pallet trucks we have replacement triple load wheel assemblies available. 

Did you know...

Daily inspection of forks can ensure safe operation. Focus on these three main areas: hooks, heels & tips.


Part # RA 950-WHL-KIT

Triple wheel assembly

Part # RA 671-041-07

Caster assembly

What other load wheel assemblies or wheel kits would you like to see us make?

Raymond 102XM Walkie Pallet Truck Parts Support

Look what we have available for your Raymond 102XM walkie electric pallet truck. Prepackaged load wheel kits contain all necessary parts for wheel replacement.

Did you know...

Preventing a problem is always better than fixing one. Here is a daily check list for finding potential hazards with your material handling equipment.

Part # GWK-102XM-LW

Load wheel kit

Part # RA 939-353-251

Caster wheel assembly

Don't see what you need? View all available parts for Raymond 102XM.

Crown PE4000 Series Walkie Rider

For your Crown PE4000 electric pallet truck we have replacement wheel kits available. Battery connectors, control arms and axles are also in stock. 

Same day shipping is available to keep your equipment moving !

Part # GWK-PE4000-LW

Load wheel kit

Part # CR 083179-035

Caster wheel assembly, 95 A

How often do you typically change out load wheels on your Crown PE4000?

Crown WP2000 Electric Walkie Pallet Truck

For your Crown WP2000 series pallet truck we have polyurethane load wheel kits, caster assemblies, drive motors, controllers, switches, drive tires & other replacement parts.

To minimize downtime we have same day shipping for orders placed by 6pm EST !

Part # GWK-WP2000-LW

Prepackaged load wheel kit

Part # CR 805888-010

Poly caster wheel assembly

What is your most time consuming lift truck repair?