Showing posts with label replacement parts. Show all posts
Showing posts with label replacement parts. Show all posts

Tuesday, November 3, 2026

The Holiday Rush Is On —

Is Your Warehouse Equipment Holding Up?

Holiday shopping is in full swing—and there are still weeks to go. Orders keep coming, pallets keep moving, and your warehouse equipment needs to keep up.

How are your pallet jacks holding up? Are the wheels rolling smoothly? Do the forks lift and lower properly? Has that small hydraulic leak finally made it onto the maintenance list?

During peak season, uptime matters. 

A pallet jack that is harder to steer, struggles to lift, or needs repair is not something to work around until January. A quick inspection, timely maintenance, and a well-planned supply of replacement parts can help keep equipment problems from interrupting the holiday rush. Regular checks should cover wheels, forks, hydraulics, handles, and—on electric models—controls and batteries.

Your Hardest-Working Equipment: Pallet Jacks

Before the next busy shift, give each jack a condition check. Use the following checklist alongside the manufacturer’s instructions:

Inspection Checklist

  • Load wheels and steer wheels: Cracks, flat spots, missing tread, excessive wear, or debris wrapped around the wheels and axles.
  • Bearings and axles: Rough rotation, binding, unusual noise, or damaged bearings.
  • Forks and frame: Bent, cracked, misaligned, or visibly damaged components.
  • Handle and controls: A secure handle and smooth operation of the lift, neutral, and lower functions, where fitted.
  • Hydraulic system: Visible leaks, weak or uneven lifting, or forks that do not lower in a controlled manner.

Pay Close Attention to Wheels and Bearings

Wheel problems are easy to overlook until a pallet jack becomes difficult to move.

A wheel can appear usable while its bearing is damaged or its axle is obstructed. Manufacturer guidance calls for checking wheels and axles for blockages, as well as wheel wear, cracks, flat spots, and broken bearings.

During the holiday rush, make wheel-area housekeeping part of the routine:

  • Remove loose stretch wrap, strapping, and other debris from travel paths.

  • Check for material caught around wheels and axles.

  • Watch out for new grinding noises, binding, or rough rolling.

  • Replace damaged wheels and bearings before the pallet jack, or the freight, gets damaged.

Do not wait for a wheel to stop turning completely before addressing a problem. A daily condition check gives your team a chance to identify damage before the next pallet move.

Keep the Right Replacement Parts on Hand

A spare-parts shelf is useful only when it contains parts that fit your equipment.

Start with the pallet jacks you use most often. Record each unit’s manufacturer, model, serial number, and applicable parts information. Maintenance records can help identify recurring repairs and high-use replacement parts.

Not sure what make and model you pallet jack is? Take a photo from the side of the hydraulic unit and text it to us to 503.523.8990 and we'll tell you.

Suggested Pallet Jack Spare-Parts List

Load-wheels 

our kits come with all the hardware you need.

Sample Load Wheel Kit for Crown PTH 50

Steer wheels

Keep replacements for high-use units with a history of wheel wear or damage.

Sample Complete Wheel Kit for Lift-Rite L55 


Bearings

Confirm whether replacement wheels include bearings or require separate components.


Axles, pins, retaining rings, and specified hardware

Review the parts diagram so a wheel repair is not delayed by a missing small component. Better yet, order one of our wheel kits and all the hardware you need is included.

Hydraulic seal kits, Handles, Valves

These might be more involved repairs, but necessary if you don't want to risk damaging the pallet jack or your product. Refer to our Step-by-step videos to help you service your jack, and order quality replacement parts on our website. We ship same day!

Before ordering, confirm fitment against the equipment’s parts documentation. Do not assume that a similar-looking wheel, bearing, or seal is interchangeable.


Look Beyond the Pallet Jack

Equipment readiness also depends on the condition of the surrounding warehouse.

A broader warehouse walk-through should include:

  • Clear, dry aisles without loose packaging or other obstructions.

  • Floor damage or uneven surfaces that need attention.

  • Carts with damaged wheels, loose handles, or compromised frames.

  • Designated equipment parking areas that do not block aisles or exits.

  • Safe charging areas and intact charging equipment for powered units.

Cleaning up the route is part of maintaining the equipment. Loose packaging on the floor can become debris caught around a pallet jack wheel or axle.

Make Maintenance Part of the Shift—Not an Afterthought

Keep the process simple enough that your team can follow it during busy periods.

When a Problem Is Found

Remove unsafe equipment from service and make its status clear so another operator does not pick it up. Record the problem and notify the supervisor or maintenance team. Operators should not improvise repairs they are not trained and authorized to perform.

After Repair

Verify that the equipment operates safely before returning it to use and update the maintenance record with the repair date and parts replaced. Post-maintenance testing and documentation help keep equipment history useful.




Tuesday, March 3, 2026

Some Basics about Forklifts

Used or new forklift? Training? OSHA?

When do my forks NOT meet OSHA standards?

When 10% of the fork heel is worn – results in 20% loss of capacity. And while checking the wear,  always check for cracks and deflection too!

When do I buy a used forklift vs. a new one?

Rough guideline: If you use a forklift 3-4 hours a day, you may be better-served with a used one. More than 4 hours a day, buying a new forklift would be most beneficial. 
Keep in mind, environment, hours used, emission restrictions, and general application may require the purchase of a new forklift.

What kind of training is required to operate a forklift?

You’ll need a valid state driver’s license and on the job operator training. In addition, OSHA requires that each forklift operator completes forklift safety training. OSHA may even conduct surprise inspections and penalties for non-compliance can go up to $7,000. 

Visit www.osha.gov for more information on training compliance.

Where do I get quality replacement parts?

That one is easy. On our website 24/7 


We have replacement parts - like Mast Chains, Seats, Lights, Horns, Backup Alarms, Starters, Alternators, and more  - for all major brands. 

Call us if you don't find what you need!


Tuesday, December 2, 2025

Why are good quality bearings crucial?

Bearings are crucial components in material handling equipment, such as pallet jacks and forklifts, because they minimize friction, support heavy loads, enable precise movement, and extend operational lifespan, directly impacting efficiency, safety, and maintenance costs.

Core Functions of Bearings

Bearings separate moving parts, such as axles, gears, and shafts, reducing friction to enable smooth and efficient operation. By facilitating low-resistance movement, they enhance energy efficiency and reduce wear, which prolongs the operational lifespan of equipment.

Support and Load Distribution

Material handling equipment routinely encounters significant weight and stress. Bearings are engineered to support and evenly distribute these heavy loads, such as those lifted by forklifts, pallet jacks, and stackers, which prevents excessive stress on individual components and increases the equipment’s stability.​

Precision and Safety

Bearings enable controlled, precision movements—essential for loading, lifting, and transporting goods safely. Reliable bearings prevent misalignment, shocks, and vibrations while accommodating harsh working environments like dust, moisture, and temperature extremes.​

Effects of Bearing Failure

Bearing failure results in increased downtime, higher operational and maintenance costs, reduced machine efficiency, and possible safety hazards. Failure can also lead to damage to other equipment components, risking worker injury and costly unplanned repairs.

Routine inspection of wheels and bearings is recommended for all lifting equipment.  

Bearings are indispensable for productivity, safety, and reliability in material handling equipment, making their selection, maintenance, and monitoring vital to any industrial operation.

Find quality bearings for your equipment on our website.



Tuesday, February 4, 2025

Let Generic Parts help you identify your pallet jack!

 When it comes time to repair your manual pallet jack, knowing what brand and model you have is crucial. We make it easy to identify your manual pallet jack so you can order the right replacement parts you need to get your jack moving again.


Save yourself valuable time and energy by going through our simple ID process!


1. Take a side-view photo of your pallet jack hydraulic unit

2. Email us at csinfo@genericparts.com or text (503)523-8990 a photo to our helpful customer service team. If you text, be sure to call us right after you send the text. 

One of our friendly customer service representatives will get back to you regarding your specific pallet jack model, along with a parts listing if available. Isn't that easy?!

If you have a question please give us a call (800)331-0839 

Or send us an email at csinfo@genericparts.com.


Generic Parts has what you need to repair and maintain your material handling equipment.


Monday, January 18, 2021


Tips for Pallet Jack Safety

They might not be as large and fast as forklifts, but accidents still happen!


The Pallet Jack Pros at Generic Parts compiled some tips (and the list is by no means complete) to keep everyone in the warehouse safe, and to avoid property damage:


Inspect your pallet jack before every use

Always use a jack that is in good shape! Make sure to test the jack thoroughly - rotating the handles, raising and lowering the jack, rolling the wheels, and so on. Replace any parts not working properly immediately to avoid major equipment damage.

Wheels and rollers need to be replaced most often since they get the most wear. We have wheels for all the major brands and ship same-day. Our convenient pre-packaged wheel kits contain all parts needed for replacement. 

If you not sure how to replace the load rollers or steer wheels, our step-by-step videos will help. You will find other convenient videos on our YouTube channel to help you replace the handle, rebuild the hydraulic unit, and more.

Give sufficient Clearance

Make sure your pallet jack won't unexpectedly catch on anything. Lift the load to give it 1 inch of clearance off the ground. Most of the time that is enough, but  check the route in advance to make sure.

Don't let hands or feet get under it

Always be conscious of where you are standing or placing your hands around its forks as you lower the jack. Most of the time raising or lowering the jack is no problem, but don't risk that it will fail and come crashing down with disastrous consequences.
Also be aware of the places where the "pinch" motion could catch your hands or feet. Often hurried work and inattention can lead to avoidable accidents.

Ask for help if you need it

When pushing a jack with a big load that you can't fully see over or around, it's important to not try to move it anyway. Instead, enlist the help of a coworker to ensure you don't run into anything or anyone.
Do not stack materials higher that eye level!

Pull, don't push

Pull the pallet jack whenever possible. Pushing the equipment makes it less maneuverable and you risk running into something, or someone, when going around a corner.

Know your Load

To prevent an unstable load, use a container for smaller items and secure larger items by bundling them up. Make sure the load is evenly distributed. A top-heavy load can tip over. Always load the heaviest items first. Center the forks evenly under the load to maintain good balance and stability and make sure the forks are positioned completely under the pallet. Never overload.
OSHA recommends limiting the weight of loads so the necessary pushing force is less than 50 pounds.

Use Personal Protective Equipment (PPE)

It’s important to have all the vital tools and equipment to make each lifting or handling job both easy and safe. Here are the necessities:

Leather Gloves: Use leather gloves when working with large, heavy materials that have sharp or rough edges.
Back Belts: A back belt is helpful in supporting your lower back while using hand trucks, carts, and pallet jacks. Make sure you have the proper fit and that it is being worn on your lower back.
Protective Footwear: Transporting items in certain areas can put you at risk for foot injuries due to falling, rolling objects or pointed materials that can pierce the sole. You may also need special designs of footwear like non-skid soles and steel-toed boots when there are slip or trip hazards in your worksite.

Additionally 

we recommend the pallet truck toe guard, to reduce the risk of the pallet jack rolling over your foot.

Dura-Guard toe guard


Use a pallet jack stop to prevent the jack from rolling out of control especially on an incline.

Pallet Jack Stop
Make sure you move the jack out of traffic areas once you're done using it. You don't want anyone to trip over the forks!

Remember, Generic Parts Service has quality replacement parts for your pallet jack in stock, and we ship same day if you order before 6 P.M. (EST).
We also carry replacement parts for electric lift trucks and forklifts.

Is pallet jack beyond repair, or you need additional ones? Take a look at our line of quality jacks here.



This information is intended for general information purposes only. This is not a substitute for review of current applicable government regulations, industry standards, or other standards specific to your business and/or activities and should not be construed as legal advice or opinion.


Monday, March 12, 2018

Seal Kits - Do you need them? Why are there so many?

Have a pallet jack that's sinking down under a load, or it won't release when you pull the lever?  Maybe it's stuck up and won't come back down to Earth. Whatever the issue is we have some tips to help you identify the cause and the parts to get you moving.

One way to trouble shoot a unit that will not lower all the way, or that you are unable to get full handle strokes is to rule out air in the system. It's quick and easy!  All you need to do is Pump the handle 15-20 times while activating the release lever.  Make sure you remove the fill cap first!  This is where the air will escape from. If oil is coming out while you are working through this process it's an indicator that you are not fully in release mode.


If your lift sinks down under a load, you can unhook the chain from the release pin and allow the pin to come out of the valve.  This allows the ball to seat, and may remedy the issue.  If not, it can be an indicator that the valve is honed out and no longer creates a tight seal when the ball seats.


If you have a unit that will not go down, check the release rod and make sure everything is moving freely.  Do the same on the underside of the jack.



Sometimes you just need to do a tear down of the hydraulic unit and rebuild it with a seal kit. Every manufacturer originally included a variation of different parts.  We have found in many cases that there are additional parts that should be replaced at the same time.  Below are outlined the differences between a super seal kit, standard and slim seal kit. 


Slim seal kits include only the most essential and commonly replaced seals. A cost saving option if you know what you need. A Standard or Super seal kit is a better choice if a complete hydraulic unit rebuild is necessary.




Standard seal kits have all of the parts included in the manufacturers' standard seal kit.




Super seal kits contain all parts that are included in a standard seal kit, as well as the most commonly needed parts beyond the standard seal kit to do a complete hydraulic unit rebuild.



When doing the repair, we encourage you to disassemble one section at a time and line up the pieces in the order you take them out.  This will save your you-know-what when you go to install the new pieces.


If you need help deciding which kit to get you can take advantage of our unmatched Customer Service. Our staff has the knowledge and experience to help you with technical problems and even assist with identifying mystery jacks.  (See this post for more on that!) We also track model changes so you can be sure to receive the correct part the first time you place an order.


On select units we have the Rebuild hydraulic unit program  available also. Email or call us today (800)331-0839!




Monday, November 2, 2015

Toyota 7HBW23 Walkie Lift Truck

For your Toyota 7HBW23 electric pallet truck we have prepackaged load wheel kits available. Battery connectors, tiller arms, switches and axles are also in stock. 

View our ever growing inventory of replacement parts for the most common brand electric lift trucks.


Load wheel kit

















Tiller arm











What other items would you like to see us manufacture for Toyota 7HBW23?

Thursday, August 20, 2015

Pallet Mule AA5500 Manual Pallet Jack

For your Pallet Mule AA5500 manual pallet jack we offer both load wheel and complete wheel kits. Complete wheel kits include a steer wheel with two load wheels assembled with bearings, plus all the necessary hardware for wheel replacement.

Did you know...

A simple change of wheels will extend the life of your pallet jack, and reduce industrial waste. That's thinking green.


Part # GWK-PUAA-CK

Complete wheel kit















Part # PU AA-68-Complete

Handle assembly












Don't see what you need? View all other available parts for Pallet Mule AA5500.

Thursday, August 13, 2015

Multiton TM 55 Manual Pallet Jack

For your Multiton TM 55 manual pallet jack we have prepackaged load wheel kits available. Each wheel kit contains two load wheels assembled with bearings, plus all the hardware you need for wheel replacement. 

Also available for this unit are seal kits for hydraulic pump rebuilding and hard parts. Ask us about assemblies that will save you time !

Part # GWK-TM55-LW

Load wheel kit















Part # MU 50410142-AM

Handle assembly















Don't see what you need? View all available parts for Multiton TM 55.

Monday, May 4, 2015

Jet PTX Manual Pallet Jack Parts Support

Looking for replacement parts for your Jet PTX manual pallet jack? We stock load & steer wheel assemblies, handle assemblies, hard parts and more.


Same day shipping available to keep your equipment moving.

Part # JT PTX2748-104

Hydraulic Pump Seal Kit














Part # JT PTX2748-054-ST

Steer Wheel Assembly


















Don't see what you need? What other parts for Jet PTX are you looking for?

Monday, March 30, 2015

BT LHM 230 Replacement Wheels & Seals

For your BT LHM 230 manual pallet jack we offer seal kits for the hydraulic pump, load wheel kits and complete wheel kits which include steer wheels assembled with bearings. Each wheel kit includes all hardware for wheel replacement. 


To keep your equipment moving we provide same day shipping!

Part #  GWK-LHM-LW
Load Wheel Kit

Part #  BT 243772
Seal Kit













Don't see what you need? View all of our available BT LHM 230 parts.

Thursday, March 19, 2015

Blue Giant ROI-5, ROI-55, & MTS 2000 Parts

We stock replacement parts for Blue Giant ROI-5, ROI-55 & MTS 2000 manual pallet jacks. Looking for load and/or steer wheel assemblies, handle assemblies, or hard parts?


To keep your material handling equipment moving we stock these items & more!

Load Wheel Assembly










Steer Wheel Assembly









Part #  BG 790-491
Handle Assembly











Don't see what you need? View all our available Blue Giant parts.