Showing posts with label manual pallet jack. Show all posts
Showing posts with label manual pallet jack. Show all posts

Friday, October 9, 2026

Pallet Truck Toe Guard

Reduce the risk of foot injury

Manual pallet jacks can carry thousands of pounds, so even a slow-moving loaded jack can cause a serious crush injury if a foot gets caught under or in front of a steering wheel. A toe guard on a pallet jack creates a physical barrier to protect your feet from getting run over or crushed by the load wheels or forks — it's one of the most common pallet jack injuries, since your feet are right at wheel height during tight turns, backing, or crowded warehouse moves.

It is particularly useful when operators:

  • Make frequent turns in narrow aisles or congested staging areas.
  • Pull loaded pallets where their feet naturally trail close to the steering wheels.
  • Work around pedestrians, pickers, packers, or other employees.
  • Handle heavy loads, where stopping or redirecting the jack quickly is harder.
  • Travel over uneven floors, dock areas, ramps, or debris-prone locations.

Secondary benefits

Beyond foot protection, a properly fitted toe guard can help deflect loose stretch wrap, wood chips, broken pallet pieces, and other debris away from the steering wheels. That can reduce wheel jams and contribute to smoother travel and less wheel-related downtime.
Many add-on guards are designed to mount behind or around the rear steering-wheel area of common manual pallet trucks without permanently modifying the truck, though compatibility, wheel diameter, ground clearance, and turning clearance should be checked before purchasing.

Generic Parts offers:

- Toe Guards already attached to the steer wheels for the easiest installation.
- Toe guard without the steer wheels for retro-fitting the pallet jacks you have.

Installation is easy! 

Just follow along our step-by-step videos:

How-to install the toe guard, already attached to the steer wheel assembly - easiest installation!

Or, if you use your installed steer wheels, how-to install the toe guard.

To order check our website, call 800-331-0839, or email us!

Tuesday, July 7, 2026

Got your sparkly new pallet jack. But wait: the handle is not attached!

To install a new pallet jack handle, first lower the jack completely by pressing the foot pedal. This will ensure that the unit doesn't come down unexpectedly onto your hands.
Assembly Steps
  1. Remove the retaining pin: Use pliers to remove the cotter pin holding the handle axle and slide the axle out partially.
  2. Position the handle: Place the handle assembly with the chain behind the roller and set the control lever in the down (pump) position. 
  3. Route the control chain: Set the handle into the pump and partially slide the axle in so you can pivot it. Drop the control chain through the center hole in the handle axle. 
  4. Secure the axle: Push the axle all the way in and use a hammer & pliers to install the roll pin to lock it into place. 
  5. Release the return spring: Pull the handle down and remove the retaining pin holding the handle return spring so the handle can rise fully. 
  6. Connect the chain: Attach the chain and connector to the foot pedal, then tighten the jam nut on top of the pedal finger-tight. 
You can follow along our step-by-step video: 


Testing the Jack
Since the handle comes pre-adjusted from the factory, you can test it directly: 
  • Pump Mode: Pump the handle to ensure the jack goes up.
  • Neutral Mode: Lift the lever into the neutral position; the jack should stay lifted but not rise as you pump. 
Are you replacing the handle? You can follow along this video

 
and get your new handle, and other replacement parts at Generic Parts Service.


Tuesday, December 2, 2025

Why are good quality bearings crucial?

Bearings are crucial components in material handling equipment, such as pallet jacks and forklifts, because they minimize friction, support heavy loads, enable precise movement, and extend operational lifespan, directly impacting efficiency, safety, and maintenance costs.

Core Functions of Bearings

Bearings separate moving parts, such as axles, gears, and shafts, reducing friction to enable smooth and efficient operation. By facilitating low-resistance movement, they enhance energy efficiency and reduce wear, which prolongs the operational lifespan of equipment.

Support and Load Distribution

Material handling equipment routinely encounters significant weight and stress. Bearings are engineered to support and evenly distribute these heavy loads, such as those lifted by forklifts, pallet jacks, and stackers, which prevents excessive stress on individual components and increases the equipment’s stability.​

Precision and Safety

Bearings enable controlled, precision movements—essential for loading, lifting, and transporting goods safely. Reliable bearings prevent misalignment, shocks, and vibrations while accommodating harsh working environments like dust, moisture, and temperature extremes.​

Effects of Bearing Failure

Bearing failure results in increased downtime, higher operational and maintenance costs, reduced machine efficiency, and possible safety hazards. Failure can also lead to damage to other equipment components, risking worker injury and costly unplanned repairs.

Routine inspection of wheels and bearings is recommended for all lifting equipment.  

Bearings are indispensable for productivity, safety, and reliability in material handling equipment, making their selection, maintenance, and monitoring vital to any industrial operation.

Find quality bearings for your equipment on our website.