Showing posts with label bleeding. Show all posts
Showing posts with label bleeding. Show all posts

Tuesday, February 3, 2026

What do you mean by "bleeding" your jack?

A manual pallet jack is usually bled by pumping the handle up and down the hydraulics with the jack unloaded and the control in the lower position until all air is purged and the lift becomes firm.

Why would I need to do this?

Air can seep into the hydraulic system. This could be caused by improper handling, such as tilting the pallet jack. When air gets into the system, it hinders the hydraulics from working and the pallet jack won’t lift anymore. Bleeding your jack releases the air.

And how do I bleed my jack?

Safety and prep

Park the pallet jack on a flat, stable floor and block the wheels so it won't roll.
Remove any load.

Bleeding


This is the procedure for most standard jacks (no opening screws):
  • Set the operating lever to “lift.”
  • Push the handle all the way down until it stops.
  • Move the lever to “lower.”
  • With the lever held in “lower,” pump the handle up and down vigorously 10–20 times.
  • Return the lever to “neutral” or “lift” and test lifting the empty forks. If lift has improved, test with a light load.

Repeat the sequence several times if the first cycle only partially improves lift.

What do I do if the jack still will not lift?

Set the lowering valve to its lowest setting, remove or open the reservoir fill plug, and verify the fluid is up to the correct level; top up if low.

After refilling, cycle the handle 10–20 times with the control in “lower” to purge any remaining air.

If it still won't lift, you may have worn seals, a faulty valve, or internal damage that requires a new seal kit or professional service: Email your pallet jack brand and model, and an outline of your problem, to csinfo@genericparts.com and we will provide technical help.



​


Monday, September 9, 2024

Basic troubleshooting for your pallet jack

Your jack is not working properly. So now what?

Here are some tips for basic troubleshooting:

If your jack is not lifting, the first thing to try is to bleed the pump: hold the lever in the release position like you are lowering the jack, and pump the handle about 10 times. This will recycle any air that is still in the hydraulic unit out of the valve and back into the reservoir where it should be.


Bleeding should resolve most lifting problems.

If the jack is still not lifting, the second thing to do is check your oil level. Carefully remove the fill plug to be able to see your oil level. For most brands of pallet jacks, the reservoir shouldn't be filled. The oil level should be about an inch to an inch, i.e., a half below the top.

Are you still having problems? To determine whether the problem is in the pump, or the handle, disconnect the lifting linkage from the lever. Make sure the lever moves freely and it's not sticking to anything. Now try to pump your handle. If the jack raises, you know your problem is in the handle or the linkage. If the jack does not raise, and you have confirmed that the problem is in the pump,  most likely the valve.

Here we show a valve replacement

If the trouble is in the handle, here you can follow along on how to adjust a handle

and here we show how to install a handle


The see all these tips, here is a troubleshooting video for an AC series pallet jack.

If your problem persists with the pump, you might have to rebuild the hydraulic unit. This is a more involved process, which you can follow (shown on a Crown PTH) here.

And finally, if you need parts for your pallet jack, but need to know what brand or model it is, take a picture of the side view of the hydraulic unit like we show you here, and text us the picture. We'll identify it for you!

And remember, your jack is your workhorse! Always inspect your jack regularly, never exceed the load capacity, and wear proper hand and foot protection, to name a few basic safety precautions.

And, of course, always visit Generic Parts Service for your replacement parts. We recommend always having an extra wheel kit on hand. And we always ship the same day (if ordered before 6pm EST).



Quality replacement parts for
Fast Lift Parts is the world's largest supplier
of after-market pallet jack parts.

Order today at www.genericparts.com

800-331-0839     *      csinfo@genericparts.com

We go the extra mile
to make sure you get what you need
- fast.