Heat Eater Wheels

When you're looking to replace the wheels on your bakery cart used in food service operations, autoclaves or laboratories... 

CA CAS-507
Caster wheel

CA CAS-507-S

Swivel caster wheel assembly

Both swivel & rigid caster models are available for a variety of applications on your material handling equipment.

• High temperature impact resistant epoxy resin
• Non-rusting stainless steel heat resistant yoke
• Precision bearings, available in 5/16" zinc or stainless steel
• Maintenance free, extended bearing life
• Non-marking wheels for floor protection

Email or call (800)331-0839 our friendly knowledgeable customer service staff today for inquires on replacement casters for your carts!

Load Wheel and Bracket Installation, Lift-Rite L-50

Looking to install load wheels on your manual pallet jack? 

Below are basic guidelines for installing a load wheel assembly within a load wheel bracket of a Lift-Rite L-50 manual pallet jack.

Note: 
4-way pallet jack does not use an exit roller. Secure the pivot axle to the frame with roll pin and install the load wheel.

Load Roller 
Insert the load roller axle sleeve into the load roller and place the load roller between the brackets. Install the axle bolt through the brackets and load roller. Secure the axle bolt with its nut. 

Load Roller Brackets
Slide the brackets onto the push rod and insert the pivot axle through the frame, brackets and exit roller. 

Line drawings available for this unit. Email or call today for your parts (800)331-0839. 

Load Wheel and Bracket Removal, Lift-Rite L-50

Looking to remove load wheels on your manual pallet jack? 

Below are basic guidelines for removing load wheel assemblies within the load wheel bracket of a Lift-Rite L-50 manual pallet jack.

Tip: Recommend to service one assembly at a time, using the other as a reference.

Load Roller 
Remove the nut and washer from the axle bolt. Slide the axle bolt out of the brackets and remove the load roller. Remove the load roller axle sleeve from the load roller.

Load Roller Brackets
You only need to replace the load wheel bracket if damaged or worn. Remove the load roller. With a pin punch and hammer, drive out the roll pin that fastens the pivot axle to the frame, then drive the pivot axle out of the frame, exit roller, and brackets. Pull the push rod away from the frame and slide the brackets off the push rod.

Line drawings available for this unit. Email or call today for your parts (800)331-0839. 

Coming next, learn how to install load rollers onto load wheel bracket...

FREE Tire Pressing – Industrial Drive Tires

Looking to press on those drive tires?

Generic Parts Service provides free tire pressing on industrial drive tires with hub up to 12” diameter.

We also offer competitive pricing on a range of drive tires, hubs and assemblies.

Login to our website with your customer number or call (800)331-0839 for price and availability on drive tires, load and caster wheel assemblies and more!

Load Wheel and Bracket Inspection, Lift-Rite L-50

Looking to replace load wheels on your manual pallet jack? 

Below are basic guidelines for inspecting load wheels within a load wheel bracket of a Lift-Rite L-50 manual pallet jack.

Load Roller
Load rollers should not have flat spots or large pieces of metal embedded in them. (i.e. tacks, nails, or metal shavings). Any chips in the wheel that keep it from rolling smoothly indicate the need for replacement. If the wheel has cracks, loose tread, or does not turn freely, replace both wheels!

Note: Always change the wheels in pairs to reduce uneven wear. 

New load rollers have an outside diameter of 3" (L-50), 2" (L-50 mini), and 1 3/4" (L-50 CHEP). If the diameter is worn more than 1/4" from its normal size, replacement is necessary.

Load Roller Brackets 
Inspect the brackets for cracks or wear from prolonged rubbing on the floor. Check for oblong axle holes and inspect the bushings closely. (see Bushing Inspection) If any of the above conditions exist, replace the brackets.

Line drawings available for this unit. Email or call today for your parts (800)331-0839. 

Blue Giant PT-50 & PT-55 Parts Support

Need new wheels your Blue Giant PT-50 manual pallet jack? Load and steer wheel assemblies complete with bearings, seal kits and hard parts are readily available for your equipment.

Did you know...

Polyurethane is the most common tread material, and is typically the best option for display floors, carpeting, and warehouses. Poly wheels do not mark the floors and roll easily and quietly.

Part # BG 103-297-A-D

Load wheel assembly

Part # BG 805-603

Hydraulic unit seal kit

How often do you exchange load wheels on your pallet jack?

Pallet Jack Push Rod Removal, Lift-Rite L-50

If you've inspected your push rod and found broken or cracked welds, bends, missing roll pins or worn bushings, removal of the push rod is likely necessary. This guide will show you how to remove the push rod(s) from your pallet jack.

Removal

Turn the jack over so the undercarriage section is exposed. Remove the load roller brackets (see Load Roller Brackets). 

Loosen the nut on the push rod and then the push rod can be threaded off the eye bolt. 

The eye bolt can be removed with the push rod by using a hammer and pin punch to drive the roll pin out of the pin that fastens the eye bolt to the lifting link. 

Remove the pin and the push rod. The eye bolt can then be removed from the jack.

Note: 

The nut on the eye bolt is primarily a marker for proper adjustment. It also keeps the eye bolt or push rod from spinning out of adjustment when working on the load roller brackets or lifting link. 

Email or call (800)331-0839 today for your replacement parts!